The M-BAR extension bar is a complementary rigging element for L-Acoustics M-BUMP. Optionally used as a single element or in pair in flown configurations, it will extend the site angle capability of Kara II and SB18 arrays.
The L-Acoustics M-BUMP rigging structure has been designed to fly or stack the Kara II enclosures as a variable-curvature, vertical line source array. M-BUMP also allows Kara II to be rigged to an SB18 subwoofer array.
The K1-DELTA is a rigging accessory for rear attachment of 2 motors to K1-BUMP pr K2-BUMP.
The L-Acoustics K2-CHARIOT, combined with two K2-JACK stabilisers, is used as a stacking platform for K2 enclosures.
K2-BUMP is designed for flying line arrays of K2, K1 or K1-SB.
By adding a K2-BAR to the L-Acoustics K2-BUMP, the site angle range can be increased. 21 holes are available on the K2-BAR which can be attached to the K2-BUMP as a rear or a front extension and in position A or B, thus offering a total of 84 discrete… Read More
A-MOUNT is a 35 mm pole-mount adapter for a single A15 Wide or A15 Focus. It is secured to the enclosure with a threaded knob and tightened onto the pole with a wedge clamp. Two locating pins match the lodgings on the enclosure.
A15-LIFT is a rigging element designed to fly a radial array of up to three L-Acoustics A15 Wide or A15 Focus cabinets. It features two studs that match the lodgings at the front and rear of the enclosure.
A15-BUMP is a reversible rigging frame for fying vertical arrays of L-Acoustics A15 Wide and A15 Focus cabinets. It is equipped with rotating rigging arms and ball-locking pins, to match the rigging systems of A15 Wide/ Focus on either side.
A10-LIFT is a rigging element designed to fly a radial array of up to three L-Acoustics A10 Wide OR A10 Focus cabinets. It features two studs that match the lodgings at the front and rear of the enclosure.
