L-Acoustics KIVA-PULLBACK Rigging Element
KIVA-PULLBACK is used to implement pull-back configurations with up to nine L-Acoustics Kiva II.
KIVA-PULLBACK is used to implement pull-back configurations with up to nine L-Acoustics Kiva II.
KIBU II is a rigging structure designed to fit the L-Acoustics Kiva II rigging system in flown configuration. 13 pickup points are available.
KIBU-SB is a rigging frame for flying arrays of L-Acoustics Kiva II cabinets and to interface Kiva II to SB15m. Each side of the rigging structure is designed to fit one enclosure type. KIBU-SB provides 13 pickup points for flying SB15m and 14 pickup points for flying Kiva… Read More
The M-BAR extension bar is a complementary rigging element for L-Acoustics M-BUMP. Optionally used as a single element or in pair in flown configurations, it will extend the site angle capability of Kara II and SB18 arrays.
The L-Acoustics M-BUMP rigging structure has been designed to fly or stack the Kara II enclosures as a variable-curvature, vertical line source array. M-BUMP also allows Kara II to be rigged to an SB18 subwoofer array.
The K1-DELTA is a rigging accessory for rear attachment of 2 motors to K1-BUMP pr K2-BUMP.
The L-Acoustics K2-CHARIOT, combined with two K2-JACK stabilisers, is used as a stacking platform for K2 enclosures.
K2-BUMP is designed for flying line arrays of K2, K1 or K1-SB.
By adding a K2-BAR to the L-Acoustics K2-BUMP, the site angle range can be increased. 21 holes are available on the K2-BAR which can be attached to the K2-BUMP as a rear or a front extension and in position A or B, thus offering a total of 84 discrete… Read More
A-MOUNT is a 35 mm pole-mount adapter for a single A15 Wide or A15 Focus. It is secured to the enclosure with a threaded knob and tightened onto the pole with a wedge clamp. Two locating pins match the lodgings on the enclosure.
